![]() This can be done with the Monitor inside or outside the pouch.ĪV Out: Connecting with a TV or another monitor: Adjust the screen for a proper viewing angle.Rotate the base of Monitor backward and place it on a flat surface.Loop the strap of the pouch around the headrest and pull the end of the strap while holding the buckle to secure the pouch to the headrest. ![]() Slide the Monitor into the pouch and attach the Velcro straps to secure the Monitor in the pouch.Installing the DVD Player and monitor onto a car seat: Adjust the seat back strap until the bag is firmly secured. Secure the lower portion of the carry bag to the vehicle seat back using the seat back strap.Adjust the headrest strap until the bag is firmly secured. Secure the upper portion of the carry bag to headrest support bars using the headrest strap.Ensure that the unit’s corners are secured by the elastic straps. Unfold the carry bag, and place the DVD player on the bag beneath the elastic straps.Installing the DVD Player onto the seat back in a car: To charge the battery, please connect the power jack directly into the DVD Player and leave connected until the red power indicator turns off.Once the battery is fully discharged, immediately recharge (regardless of whether you plan to use battery or not) in order to maximize battery life.The DVD player must be set to power off.At this point you may remove the wall plug and stop charging. Once fully recharged, the red light will turn off. During recharge, the red indicator will stay on. Each full recharge takes approximately five hours and one full charge can provide power to the player for approximately 2 hours. The battery must be charged at least 8 hours prior to first use. This means the Li-Polymer batteries do not have “Memory Effect” and thus can be recharged regardless of whether the battery is fully or only partially discharged. Li-Polymer batteries feature high storage capacity and low level of degradation. Each full recharge takes approximately five hours and one full charge can provide power to the player for approximately 2 hours.īuilt-In Rechargeable Battery: The DVD player utilizes a long-life Li-Polymer battery for portability. Your new battery must be charged a minimum of 8 hours before the first usage. Once the indicator is off, remove the AC to DC adapter wall plug. Once fully charged, the LED indicator will turn off. Make sure the player is in the “ Power Off” mode. Connect the main unit AV OUT and extra screen AV IN with the 2 supplied AV cables.īuilt-in Battery: Plug one end of the AC to DC adapter into the DC jack on the side of the player, then plug the other end into the 100~240V AC power outlet. Plug the ends of the DC power adapter output into the DC 9-12V jack on the main unit and the extra screen and plug the input end into the vehicle power socket. Powering the system in a car (D1788ES Only): The DC power adapter has two 9V output plugs. ![]() Powering the system in a car ( D1788 and D1788PK Only): Plug one end of the DC power adapter into the DC jack on the unit, then plug the other end into the vehicle‘s DC power socket. Powering the system indoors: Plug one end of the AC to DC adapter into the DC 9-12V jack on the right side of the main unit, then plug the other end into the 100- 240V AC power receptacle. Powering and Connecting the Audiovox D1788 DVD Player
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |